Dräger tubes

Dräger colorimetric reagent tubes are today's "best-seller" reagent tubes for the precise spot measurement of over 500 gases and vapors. Dräger tubes feature with a manual or automatic pump. They are used to determine peak concentrations, measure exposure levels, detect leaks of gaseous substances, or analyze the quality of breathing air in various confined spaces. Dräger colorimetric tubes have been designed for immediate, spot-on measurement at a precise location over a short period.

Dräger tubes
  1. The Dräger Simultaneous Test Kits (semi-quantitative measurement with test tubes) are used to measure decomposition, fumigation, or fire gases for a quick hazard assessment. They consist of 5 reagent tubes parallelly arranged in a rubber sleeve and operate with the Accuro manual sampling pump.

    • Reliable measurements for different families of organic and inorganic gases from the fire, fumigation, or decomposition
    • Simultaneous measurement of 5 gases by colorimetric reagent tubes with direct reading on the tubes
    • Works in combination with the Accuro hand pump
    • Fast and reliable results
  2. The Dräger diffusion tubes are dosimeter tubes that allow the control of individual exposures, particularly the measurement of OEL (Occupational Exposure Limit). This measurement system is called "passive" and is based on the diffusion of contaminant molecules in the air. It does not require a pump, unlike conventional colorimetric reagent tubes.

    • A simple and economic method of measurement of the limit occupational of exposure (OEL)
    • Worn directly near the respiratory tract, like a badge
    • Direct reading, graduated scale printed on the tube
    • Does not require a sampling pump
    • Simple and economical measurement method

  3. Several million tubes sold, Dräger tubes are the standard for the instantaneous measurement of gas concentrations in ambient air. Used in combination with the Accuro hand pump or the X-act 5000 automatic pump, they are a simple, accurate, and cost-effective solution that requires no special technical skills.

    • More than 200 references of colorimetric reagent tubes for the measurement of more than 500 gases and vapors
    • Used in many fields of applications: peak concentrations, exposure levels, leak detection, air quality analysis, etc.
    • Operation in combination with a manual or automatic pump
    • Simple process for accurate measurement without special knowledge
    • Short measurement time: 5 seconds to 15 minutes

  4. The Accuro pump is a manual bellows sampling pump for measuring substances and gases with Dräger colorimetric reagent tubes. The pump body consists of a bellows which is compressed for measurement. When the bellows is released, the air is automatically pumped out, and the gas sample to be measured is sucked through the used reagent tube.

    • Easy-to-use bellows hand pump in combination with Dräger colorimetric test tubes
    • Integrated stroke counter for easy checking of the number of strokes performed
    • One-handed operation, suitable for use in ATEX areas
    • Integrated end-of-stroke indicator (pump stroke)
    • Integrated pipe cutter: Simple cutting of the pipes with a ceramic blade for a clean opening
  5. The X-act 5000 pump automatically performs the sampling required for gases, substances, and vapors measurement with Dräger colorimetric test tubes. Ideal for those that need a large number of pump strokes, it is equipped with a large LCD screen for displaying the results and can be used in hazardous areas (ATEX Gas).

    • Gas point measurement: Identification and configuration of the automated measures by barcode
    • Ex-approved for use in confined spaces and hazardous areas
    • Ideal for measurements requiring a large number of pump strokes
    • Large LCD screen: configuration and display of results
    • Illuminated indicators for errors and end of a measurement
  6. The Dräger X-act 7000 is a highly accurate optoelectronic gas analyzer that measures low gas concentrations (in ppb) via a new reactive micro-tube technology. It is particularly suitable to measure benzene, butadiene, formaldehyde, hydrocarbons, mercury, ethylene oxide, hydrogen sulfide, toluene, or xylene.

    • Analyseur de substances toxiques et/ou cancérigènes en ppb avec des résultats d’analyse immédiats, dignes des tests en laboratoire
    • Temps de test : de 5 secondes à 1200 secondes selon les micro-tubes utilisés et la plage de mesure de la substance
    • Affichage directe de la mesure sur écran couleur LCD 2.4’’
    • Autonomie d'environ 600 minutes de temps de test
    • Certifié ATEX / IECEx zone 0
  7. In accordance with the EN12021 standard for compressed breathing air quality, the Dräger Aerotest systems allow monitoring the quality of compressed breathing air on low pressure (Aerotest Alpha) or high pressure (Aerotest Simultan HP) networks. They are connected directly and simply to the air network via a G 5/8 connector.

    • Control and detection of various potentially hazardous substances in compressed air according to EN12021
    • Quantitative measurement of CO, CO2, water, and oil vapor by reagent tubes
    • Simple and fast operation (measurement time 5 minutes)
    • Practical, lightweight carrying case for on-site analysis
    • Dräger oil impactor for monitoring oil aerosols
  8. Dräger smoke tubes are used as airflow detectors. They allow to bring to light a leak of air and help to observe its point of origin, to know its speed and its direction. We use a rubber bulb to push air through the tube, creating a white smoke that is carried by any existing airflow and visible to the naked eye.

    • Complete airflow detector kit: a storage case, suction bulb, plugs, and ten smoke tubes
    • Quick identification of airflows by white smoke
    • Ergonomic design and easy-to-use device
    • Reclosable smoke tube for further use
    • Universal use
  9. The Dräger Flow Check is an airflow detector that produces a cloud of white smoke from a bulb containing an environmentally friendly smoke solution. The dispersion of this smoke allows us to locate and identify precisely the direction of any air movement or to check the integrity of sealed systems.

    • Ideal airflow detector for airflow control and ventilation systems
    • A convenient and easy-to-use handheld device
    • Rechargeable NiCd battery, 20 min autonomy
    • Available in a complete ready-to-use kit
    • Excellent quality/price ratio