ATi - Analytical technology Inc.
ATI® (Analytical Technology Inc.) is a world leader in the design, development, and manufacture of gas monitoring and detection solutions for the sanitation, water treatment, pharmaceutical, and industrial sectors. They specialize in toxic gas detection products with over 60 specific gas sensors. It is one of the few manufacturers worldwide to produce H202 (hydrogen peroxide) and PAA (peracetic acid) sensors. ATI is a subsidiary of the Badger Meter® Group with a manufacturing facility in Collegeville, PA, and a European headquarters near Manchester, UK.
The B12 ATI is a gas transmitter sensor with a 4-20 mA output, particularly suitable for the detection of exotic gases with a short response time: Alcohols, AsH3, B2H6, Br2, C2H2, C2H4O, CH2O, Cl2, ClO2, CO, COCl2, F2, GeH4, H2, H2O2, H2S, H2Se, HCl, HCN, HF, I2, NH3, NO, NO2, Nox, O2, O3, PH3, SiH4, SO2 & Steam.
- Fixed gas transmitter sensor with a linear 4-20 mA signal
- Direct measurement with fast response time
- NEMA 4X polystyrene enclosure with optional LCD
- Low power consumption, 12 to 28 VDC power source
- Minimal and easy maintenance with sensor replacement in seconds
With more than 60 pre-calibrated "smart" sensors, the F12 is a toxic gas transmitter with interchangeable sensors for the detection of exotic gases (formaldehyde, nitric oxide, phosgene), oxidizing gases (bromine, fluorine, iodine, ozone, hydrogen peroxide), acidic gases (hydrogen bromide, hydrogen cyanide) or gaseous hydrides (diborane, germane, silane)
- 60 interchangeable pre-calibrated smart sensors for rare gas leak detection (38 different gases)
- Auto Test function available for many gases: allows to perform a real gas response test
- Large backlit LCD, 4-20mA output, and alarm relay for servo control
- Measurement logging and calibration history stored in the sensor
- F12iS (ATEX) variant available with optional Hart® output
The D12-IR N2O Nitrous oxide fixed detector is an ATEX gas transmitter with 4-20 mA output, alarm relay, and a digital display that may be connected to a control system (PLC, central gas detection system) or used as a stand-alone control point. It is widespread in the medical sector, dental offices, and veterinary clinics.
- Fixed nitrous oxide (N2O) gas detector with non-dispersive infrared (NDIR) technology
- Corrosion-resistant cast aluminum housing with sintered flame arrestors (ATEX certified)
- Backlit LCD graphic display and 4-20 mA linear output as standard
- Alarm relay, Modbus, or HART communication options available
- Non-intrusive parameterization and calibration via magnetic switch
The PortaSens III is a rare gas leak detector with interchangeable cells that can detect various exotic gases, such as Alcohols, AsH3, B2H6, Br2, C2H2, CH3COOH, CH2O, CH4, Cl2, ClO2, CO, CO2, COCl2, DMA, ETO, F2, Acid gases (acetic and peracetic acid), GeH4, H2, H2O2, H2S, H2Se, HBr, HC, HCl, HCN, HF, I2, NH3, NO, NO2, Nox, O2, O3, PAA, PH3, SiH4, SO2.
- 62 interchangeable pre-calibrated smart sensors for rare gas leak detection (38 different gases)
- Intelligent sensors with pre-set parameters displayed at start-up - Fast sensor change (less than 1 minute)
- Internal sampling pump and flexible probe for easy leak detection and location
- Recording capacity: 8 days with a programmable interval of 1 minute
- Color touch screen for easy operation
ATi portable gas detector
Innovative and versatile, ATi's D16 PortaSens is a portable single-gas detector designed to perform regular leak checks in gas storage areas, water treatment, pipeline inspection, or in confined spaces before entering them. It has an internal sampling pump and a flexible probe to facilitate the search and location of gas leaks. It offers a broad range of intelligent sensors with a memory of all the parameters of the gas to be detected (scale, alarms, calibration, etc.).
ATi fixed gas transmitters
With more than 60 pre-calibrated "intelligent" cells, ATi has a complete range of fixed gas detectors that can easily be interfaced with gas detection controllers or safety automats. Three fixed gas detectors are leaders in exotic gas detection: the B12 transmitter, well known in the pharmaceutical sector; the F12D gas detector (also available in the intrinsic safety version), and the D12IR detector for flammable gases or nitrous oxide (N2O) detection.
Gases detected: Acetylene (C2H2) - Acetic acid (AcOH) - Acid gases - Alcohol - Ammonia (NH3) - Arsine (AsH3) - Bromine (Br2) - Carbon dioxide (CO2) - Carbon monoxide (CO) - Chlorine (Cl2) - Chlorine dioxide (ClO2) - Cyanidic acid (HCN) - Diborane (B2H6) - Dimethylamine (DMA) - Ethylene oxide (ETO) - Fluorine (F2) - Formaldehyde (CH2O) - Germanium tetrahydride (GeH4) - Hydrocarbons - Hydrogen (H2) - Hydrogen bromide (HBr) - Hydrogen chloride (HCl) - Hydrogen fluoride (HF) - Hydrogen peroxide (H2O2) - Hydrogen selenium (H2Ge) - Hydrogen sulfide (H2S) - Iodine (I2) - Methane (CH4) - Nitric oxide (NO) - Nitrogen dioxide (NO2) - Nitrogen oxides (NOx) - Oxygen (O2) - Ozone (O3) - Peracetic acid (PAA) - Phosgene (COCl2) - Phosphine (PH3) - Silane (SiH4) - Sulfur dioxide (SO2).
The ATi / GazDetect partnership
ATi is a privileged partner of GazDetect for the detection of exotic gases (formaldehyde, nitric oxide, phosgene), oxidizing gases (bromine, fluorine, iodine, ozone, hydrogen peroxide), acidic gases (peracetic acid, hydrogen bromide, hydrogen cyanide) or gaseous hydrides (diborane, germane, silane).